Variable & Fixed Speed | Econ V and F Series
The Econ V and F series are compact, peristaltic pumps offering simple on and off metering for general light duty applications. The pumps are equipped with a wall adapter power supply.
Econ V 1.4 to 40 gpd, 25 psi maximum
Econ F 11 to 54 gpd, 25 psi maximum
The Econ V and Econ F are compact peristaltic pumps for simple metering applications.
Both the Econ V and the Econ F pumps are totally enclosed with a brushed motor for light duty or general intermittent applications. These compact pumps are equipped with a wall adapter power supply. The pumps work well for fluid transfer or sampling. They can inject solutions such as chlorine, acid, syrups, plating bath solutions, polyphosphates, corrosion inhibitors, biocides and a variety of other additives.
Both pumps are designed with the patented quick release pump head for effortless and fast tube replacement without tools. The pump tubes are manufactured as a single piece construction. The tube fitting is overmolded to the tube material for a stronger connection. Each pump is equipped with a wall adapter power supply.
The Econ V is a variable speed pump and features an adjustable potentiometer. The pump series has a selection of six different models with output ranges of 11 to 54 gallons per day with pressures to 25 psi. (41.6 to 136.3 lpd / 1.7 bar).
The Econ F is a fixed output pump and is not adjustable. The pump runs at full speed when power is applied. There are six different models and the outputs are 11, 18, 22, 33, 36, or 54 gallons per day with pressures to 25 psi. (41.6, 68.1, 83.3, 124.9, 136.3 or 204.4 lpd / 1.7 bar)
The pumps are wall mountable or select one of the optional mounting accessories. The Econ V or F is offered as a Tank System; the pump is shipped pre-mounted to a 7.5, 15 or 30 gallon solution tank. The pumps are cULus for indoor and outdoor use; CE IP44 is also available.
Unique Stenner Features
- Effortless tube replacement with patented quick release pump head
- Solid one piece tube construction
- Mounting options
Advantages of Stenner's Peristaltic Pumps
- Solution is not in contact with moving parts and runs through a food grade pump tube.
- Pump head requires no valves, allows for easy maintenance.
- Self-priming against maximum working pressure, foot valve not required.
- Pump does not lose prime or vapor lock.
- Pumps off-gassing solutions and can run dry.
- Output volume is not affected by back pressure.
|To view these documents, you need Adobe Acrobat Reader. You can download a free copy from the Adobe website.|
Econ V – Variable Speed
Econ F – Fixed Output
|NOTICE: The information within this chart is solely intended for use as a guide. The output data is an approximation based on pumping water under a controlled testing environment. Many variables can affect the output of the pump. Stenner Pump Company recommends that all metering pumps undergo field calibration by means of analytical testing to confirm their outputs.|
|Output Control||Econ V: adjustable potentiometer|
Econ F: fixed speed
|Maximum Working Pressure||25 psi (1.7 bar) |
|Maximum Operating Temperature||104°F (40°C)|
|Maximum Suction Lift||25 ft (7.6 m) vertical lift, based on water|
|Motor Type||24 VDC, brushed|
|Approximate Shaft RPM||65 maximum (E20 models)|
|Motor Voltage||120 V 60Hz, 240 V 50Hz|
|Power Cord Type||SPT-2W|
|Power Cord Plug End||2-prong wall transformer|
|Classification||Indoor / Outdoor|
|Materials of Construction|
|Pump Tube||Santoprene®*, FDA approved|
|Pump Head Rollers||Polyethylene|
|Polyethylene, FDA approved|
|Tube and Injection Fittings||PVC or Polypropylene, NSF listed|
|Connecting Nuts||PVC, NSF listed|
|Suction Line Strainer||PVC, NSF listed, with ceramic weight|
|All Fasteners||Stainless steel|
* Santoprene® is a registered trademark of Exxon Mobil Corporation.