Stenner Pump Company - 45MHP2 Classic Series Single Head Adjustable Output Pump

45MHP2 Specifications Summary

100 psi (6.9 bar) Single Head Adjustable Output Pump max 3 gpd (11 lpd)

Outputs @ 60Hz
Gallons per day:0.2 to 3.0
Gallons per hour: 0.01 to 0.13
Liters per day: 0.8 to 11.4
Liters per hour: 0.03 to 0.48
Ounces per minute: 0.02 to 0.27
Milliliter per minute: 0.56 to 7.92

Outputs @ 50Hz
Liters per day: 0.6 to 9.1
Liters per hour: 0.03 to 0.38
Milliliters per minute: 0.31 to 6.32

Discharge Pressure
26-100 psi (1.8-6.9 bar)

Voltage
120V 60Hz; 220V 60Hz
230V 50Hz; 250V 50Hz International

Gear Motor
Shaded pole, class B; 1/30 HP;
approx. 26 rpm

Suction Lift
25' (7.6 m) vertical lift, based on water

Maximum Operating Temperature
125° F (52° C)

Amp Draw
1.7 120V; 0.9 220V, 230V, 250V

Dimensions (l x w x h)
10.6 x 5.3 x 6.0 in. (26.9 x 13.4 x 15.2 cm)

Shipping Weight
9 lbs (4 kg)

Materials of Construction
All Housings: Polycarbonate
Pump Tube & Check Valve Duckbill: Santoprene® FDA approved
Pump Head Latches: Polypropylene
Suction/Discharge Tubing; Ferrules 1/4" & 6 mm: Polyethylene, FDA approved
Tube Fittings: Gray fittings: Type 1 Rigid PVC, NSF listed, Black fittings: PP, NSF listed
Check Valve Fittings: Type 1 Rigid PVC, NSF listed
Connecting Nuts: PP or Type 1 Rigid PVC
Suction Strainer: PP or Type 1 Rigid PVC body with Type 1 Rigid PVC cap,
NSF listed; ceramic weight,
All Fasteners: Stainless Steel

  Santoprene® is a registered trademark of Exxon Mobil Corporation
  Refer to the chemical resistance guide for compatibility

Agency listings (vary by models)
UL, CSA , CE, ETL to NSF 50, WQA to NSF 61

Accessories shipped with each pump
3 connecting nuts 1/4" or 3/8"
3 ferrules 1/4" & 6 mm OR 2 ferrules 3/8"
1 injection check valve
1 weighted strainer
1 20' roll of suction/discharge tubing 1/4" or 3/8" white or UV black
OR 6 mm (Europe) white
1 additional pump tube
2 additional latches
1 mounting bracket
1 installation manual