Pumps

S10P

S10P Series

The S10P Series is a peristaltic metering pump activated by a water meter, control valve, flow switch or any control equipment that responds to water flow. The control equipment is wired to the pump input terminals to accept a dry contact or 12-24 VAC/VDC signal. The pump runs at a set time, a set speed or a set flow rate output according to the mode of operation selected. The flow rate outputs are up to 30 gallons per day at 100 psi maximum. The functions are easy to program on the six-button control pad with a backlit LCD window.

MODES OF OPERATION

10 PPG MODE: Use with a 10 PPG dry contact water meter and with process flows from 0.1 to 14.0 gallons per minute. The pump runs at the programmed flow rate output for each pulse. The flow rate output is adjustable from 50% to 100% in 5% increments. The connection is not polarity sensitive.

FLOW SWITCH MODE: The pump accepts a dry contact from a 2 wire flow switch and runs at the programmed speed for as long as it receives the contact. The pump speed is adjustable from 10% to 100% in 1% increments.

SECONDS MODE: The pump receives a dry contact from a water meter, control valve or any other type of control equipment that responds to flow. The pump runs for a programmed amount of time for each pulse. The run time is adjustable from 0.1 to 60 seconds.

AUXILIARY MODE: The pump accepts a 12-24 VAC/VDC signal from a control valve or another type of control equipment that responds to flow. The pump runs at a programmed speed for as long as it receives the signal. The speed is adjustable from 10% to 100% in 1% increments.

TUBE TIMERS

Pump Life Hours: Running total of the pump run hours, up to 65,000 hours, not resettable

Tube Run Hours: Total hours the pump tube has been in service

Tube Change Hours: Set the desired hours for the tube to run. When hours are exceeded, display flashes CHANGE as a tube replacement reminder

Reset Tube Hours: Resets Tube Run Hours to zero

The PUMP STATUS INDICATORS include: Prime, Standby, Leak, Level. Change, Keypad Locked, Signal (excluding 10 PPG).



Flow Rate Outputs

Technical Data

Parts

Exploded View

100 psi (6.9 bar) max. 

Pump
Prefix
Pump
Tube
 Turndown
Ratio
Turndown
@ 10 PPG
Gallons
per Day
Gallons
per Hour
Ounces
per Hour
Ounces
per Minute
Liters
Per Day
Liters
Per Hour
Milliliters
per Hour
Milliliters
per Minute
Approximate Maximum Output @ 50/60Hz
S3P01110:14:15.00.2127.00.4419.00.79789.013.0
S3P02210:14:117.00.7191.01.5164.02.682681.045.0
S3P06610:14:130.01.25160.02.67114.04.734732.079.0

Specifications

Flow Rate Output Control

Six button control panel with LCD display

Reproducibility

+/- 2%

Maximum Working Pressure

100 psi (6.9 bar)

Maximum Operating Temperature

104°F (40°C)

Maximum Suction Lift

25 ft (7.6 m) vertical lift, based on water

Motor Type

Brushless DC motor

Shaft RPM (average maximum)

45

Duty Cycle

Continuous

Maximum Viscosity

1500 Centipoise

Motor Voltage (Amp Draw)

120V 60Hz 1PH (0.6)

Power Cord Type

120V 60Hz SJTOWA

Power Cord Plug End

120V 60 Hz 5-15P

Power Cord Length

6 ft (1.8 m)

Classification

Indoor / Outdoor

Materials of Construction

All Housings

Polycarbonate

Pump Tube & Check Valve Duckbill

Santoprene®* (FDA approved)

Pump Head Rollers

Polyethylene

Suction/Discharge Line, and Ferrules

Polyethylene (FDA approved)

Tube & Injection Fittings

PVC or Polypropylene (both NSF listed)

Connecting Nuts

PVC or Polypropylene (both NSF listed)

Suction Line Strainer and Cap

PVC or Polypropylene (both NSF listed); ceramic weight

All Fasteners

Stainless steel

Pump Head Latches

Polypropylene

Leak Detect Components

Hastelloy®**

Refer to the chemical resistance guide to determine the compatibility of the wetted components with the solution you want to pump or Contact Us.

* Santoprene® is a registered trademark of Celanese International Corporation.
**Hastelloy® is a registered trademark of Haynes International, Inc.


Listings vary by model

14 x 9 x 10 in. (35 x 23 x 24 cm)

9 lbs (3.7 kg)

S3 Pump Head (S Series, S420, S Variable & S10P)
S3QP Tube Housing & Latches S3QP Roller Assembly Pump Tube S3QP Tube Housing Cover

S3QP Tube Housing & Latches

EA
S3400-1
2-PK
S3400-2

S3QP Roller Assembly

EA
S3500-1
4-PK
S3500-4

Pump Tube

Refer to Pump Tubes page

S3QP Tube Housing Cover

EA
S3600-1
4-PK
S3600-4

Key Features

  • Totally Enclosed Housing

  • Leak Detection

  • Signal Repeater

  • Tube Timers

  • 2 Year Warranty

Item Numbers

Create

Literature

Download

Connect with
Stenner Experts

Get your pump answers.
Find out where to buy.