Pumps

S Series

Smart pump interfaces with process control systems

S Series Models

S30

S40

S50

The S Series is a smart peristaltic metering pump designed to interface with process control systems utilizing a 4-20mA output signal and three output relays.

Built for demanding applications, the rugged construction includes a totally enclosed housing built to NEMA 4X. The brushless DC motor is equipped with ball bearing support, and the switch power mode offers energy efficiency. The pump head has a splined shaft allowing smooth installation and parts replacement.

Password protection prevents unauthorized access to the programmed settings. Transfer operation from the primary pump to a backup S Series.

The pump can be programmed with three output relays to respond based on a selected condition. The performance indicators communicate the pump status:

Backup Pump Programming Video

Tube Leak Programming Video

4-20mA Programming Video

Select from 9 modes of operation:

4-20mA: scalable, invertible
0-10VDC: scalable, invertible
Pulse
Hall Effect
PPM Feed Constant Flow – flow switch
PPM Feed Variable Flow – hall effect
Manual
7 Day/24 Hour Timer
Cycle Timer

Flow Rate Outputs

Technical Data

Parts

Exploded View

Flow Rate Outputs

Pump Prefix	Pump Tube	Turndown Ratio	Gallons per Day	Gallons per Hour	Ounces per Hour	Ounces per Minute	Liters Per Day	Liters Per Hour	Milliliters per Hour	Milliliters per Minute
25 psi (1.7 bar) max.			Approximate Output @ 50/60Hz
S3003	3	100:1	0.40-40.0	0.017-1.67	2.13-213.0	0.036-3.56	1.51-151.0	0.063-6.31	63.09-6309.0	1.05-105.0
S3004	4	100:1	0.60-60.0	0.025-2.50	3.20-320.0	0.053-5.33	2.27-227.0	0.095-9.46	94.64-9464.0	1.58-158.0
S3005	5	100:1	0.85-85.0	0.035-3.54	4.53-453.0	0.076-7.56	3.22-322.0	0.134-13.41	134.07-13407.0	2.23-223.0
S405X	5X	100:1	1.5-150.0	0.06-6.25	8.0-800.0	0.13-13.33	5.7-567.0	0.24-23.66	236.59-23,659.0	3.94- 94.0
S505G	5G	100:1	3.2-315.0	0.133-13.13	17.07-1680.0	0.284-28.00	12.11-1192.0	0.505-49.68	504.72-49,684.0	8.41-828.0
100 psi (6.9 bar) max.			Approximate Output @ 50/60Hz
S3001	1	100:1	0.05-5.0	0.002-0.21	0.27-27.0	0.004-0.44	0.19-19.0	0.008-0.79	7.89-789.0	0.13-13.0
S3002	2	100:1	0.17-17.0	0.007-0.71	0.91-91.0	0.015-1.51	0.64-64.0	0.027- 2.68	26.81-2681.0	0.45-45.0
S3007	7	100:1	0.40-40.0	0.017-1.67	2.13-213.0	0.036-3.56	1.51-151.0	0.063-6.31	63.09-6309.0	1.05-105.0
S407X	7X	100:1	0.60-60.0	0.03-2.50	3.2-320.0	0.053-5.34	2.3-227.0	0.09-9.46	94.64 to 9464.0	1.58-158.0
S507G	7G	100:1	1.3–125.0	0.054-5.21	6.93-667.0	0.116-11.11	4.9-473.0	0.205- 19.72	205.04-19716.0	3.42-329.0

Notice: The information within the charts above is solely intended for use as a guide. The output data is an approximation based on pumping water under a controlled testing environment. Many variables can affect the output of the pump. Stenner Pump Company recommends that all metering pumps undergo field calibration by means of analytical testing to confirm their outputs

Technical Data

Specifications

Flow Rate Output Control

Varies per control mode; digital keypad

Reproducibility

+/- 2%

Maximum Working Pressure

25 psi (1.7 bar), 100 psi (6.9 bar)

Maximum Operating Temperature

104°F (40°C)

Maximum Suction Lift

25 ft (7.6 m) vertical lift, based on water

Motor Type

Brushless DC motor

Shaft RPM (average maximum)

Duty Cycle

Continuous

Maximum Viscosity

1500 Centipoise

Motor Voltage (Amp Draw)

120V 60Hz 1PH (0.6); 230V 60Hz 1PH (0.3); 230V 50Hz 1PH (0.3)

Hall Effect Max. Input Frequency

100 KHz

Pulse Duration Required

10 milliseconds (minimum duration required for pump to read signal)

Power Cord Type

120V 60Hz SJTOWA; 230V 60Hz SJTOWA; 230V 50Hz H05RN-F

Power Cord Plug End

120V 60Hz 5-15P; 230V 60Hz 6-15P; 230V 50Hz CEE7/7

Cord Length

6 ft (1.8 m)

Classification

Indoor/Outdoor

Materials of Construction

All Housings

Polycarbonate

Pump Tube (S30, S50)

Santoprene®* (FDA approved) or Versilon®**

Pump Tube (S40)

Santoprene®* (FDA approved)

Check Valve Duckbill (S30)

Santoprene®* (FDA approved) or Pellethane®†

Ball Check Valve Components (S40, S50)

Ceramic ball (FDA approved); tantalum spring; FKM
seat & O-ring OR Ceramic ball (FDA approved); stainless steel
spring; EPDM seat; Santoprene® O-ring

Pump Head Rollers (S30, S40)

Polyethylene

Pump Head Rollers (S50)

Polycarbonate

Pump Head Guide Rollers (S40, S50)

Polyethylene

Suction/Discharge Line, Ferrules

Polyethylene (FDA approved)

Tube & Injection Fittings

PVC or Polypropylene (both NSF listed)

Connecting Nuts

PVC or Polypropylene (both NSF listed)

3/8″ Adapter (S30)

PVC or Polypropylene (both NSF listed)

Suction Line Strainer and Cap

PVC or Polypropylene (both NSF listed); ceramic weight

All Fasteners

Stainless steel

Pump Head Latches (S30)

Polypropylene

Pump Head Thumb Screws (S40, S50)

Stainless steel and PVC

Pump Head Support, Transition Sleeve (S40, S50)

Santoprene®*

Tube Pull (S40, S50)

PVC

Leak Detect Components (S30)

Hastelloy®††

Leak Detect Components (S40, S50)

Hastelloy®††, stainless steel

Refer to the chemical resistance guide to determine the compatibility of the wetted components with the solution you want to pump or Contact Us.

* Santoprene® is a registered trademark of Celanese International Corporation.
** Versilon® is a registered trademark of Saint-Gobain Performance Plastics.
† Pellethane® is a registered trademark of The Dow Company.
†† Hastelloy® is a registered trademark of Haynes International, Inc.

Pump Dimensions

S30 Model

S40 Model

S50 Model

Agency Listings

IAPMO listed, conforms to standard NSF/ANSI 61 & 372 (excludes models with a Versilon®tube).

INTERTEK/ETL Sanitation listed, conforms to standard NSF/ANSI 50 (excludes models with a 7X or 7G tube or a ball check valve with stainless steel spring.)

INTERTEK/ETL tested for CE IP65 rating with maximum altitude of 2000 m.

Listings vary by model.