Electromechanical | Classic Series | Double Head Adjustable Chemical Injection Pump
For over 60 years, Stenner's time-tested peristaltic pump offers consistency.
- Self-priming against maximum working pressure,
foot valve not required.
- Can run dry and does not clog from dirt and debris.
- Can pump off-gassing solutions without losing prime.
Flow Rate Outputs
0.3 to 170 gpd up to 25 psi maximum
0.3 to 34 gpd up to 100 psi maximum
The Double Head Adjustable Output Pump is another variation to select from in the Classic Series, electro-mechanical pump line.
Similar to the other models in the Classic series, the Double Head Adjustable Output Pump will dose solutions such as sodium hypochlorite, acid, polyphosphates, biocides for common water treatment applications that include disinfection, pH control, corrosion and scale control, oxidation and sanitization. This pump series provides twice the output for large Commercial Pool and Aquatic Facilities or Water and Wastewater treatment plants. The pump can also inject two compatible solutions at the same ratio. The Classic Series double head adjustable output pump is built the same way as the single head adjustable with the addition of another pump head that doubles the output.
How the Double Head Adjustable Output Pump Works
The output is determined by three factors; the rpm of the motor gears, the setting on the feed rate control and the pump tubes in both heads. The feed rate control has an external dial ring that is labeled L to 10 offering an adjustable output of 5% to 100% in 2.5% increments.
Unique Stenner Features
- Interchangeable pump heads and tubes to convert one model to another; not necessary to purchase a new pump.
- Easy and fast tube replacement without tools with the QuickPro® pump head.
- The pump is built with four detachable components; the motor, feed rate control and two pump heads, that can be separated without tools.
The 100 and 170 models are two sub-series within the Classic Series Double Head Pumps (Adjustable and Fixed) and below is a summary of the primary differences in the Adjustable.
|100 Series Adjustable||170 Series Adjustable|
|To view these documents, you need Adobe Acrobat Reader. You can download a free copy from the Adobe website.|
Flow Rate Output Chart 25 psi (1.7 bar) maximum Approximate 20:1 turndown, 2.5% increments
Flow Rate Output Chart 100 psi (6.9 bar) maximum Approximate 20:1 turndown, 2.5% increments
NOTE: Injection check valve included with pumps rated 100 psi (6.9 bar) maximum.
|NOTICE: The information within this chart is solely intended for use as a guide. The output data is an approximation based on pumping water under a controlled testing environment. Many variables can affect the output of the pump. Stenner Pump Company recommends that all metering pumps undergo field calibration by means of analytical testing to confirm their outputs.|
|Flow Rate Output Control||External dial ring|
|Maximum Working Pressure||25 psi (1.7 bar), 100 psi (6.9 bar)|
|Maximum Operating Temperature||125°F (52°C)|
|Maximum Suction Lift||25 ft (7.6 m) vertical lift, based on water|
|Motor Type||1/30 HP, shaded pole, class B|
|Shaft RPM (average maximum)||26 or 44|
|Maximum Viscosity||1500 Centipoise|
|Motor Voltage (Amp Draw)||120V 60Hz 1PH (1.7)|
220V 60Hz 1PH (0.9)
230V 50Hz 1PH (0.9)
250V 50Hz 1PH (0.9)
|Power Cord Type||120V 60Hz, 220V 60 Hz: SJTOW|
230V 60Hz, 250V, 60Hz: H05VV-F
|Power Cord Plug End||120V 60Hz NEMA 5-15P|
220V 60Hz NEMA 6-15P
230V 50Hz CEE 7/7
250V 50Hz CEE 7/7
|Cord Length||6 ft (1.8 m)|
|Classification||Indoor and suitable for Outdoor when installed with|
a Stenner Rain Roof part number MP90000
|Materials of Construction|
|Pump Tube||Santoprene®* FDA approved, Versilon®**|
|Check Valve Duckbill (when applicable)||Santoprene®* FDA approved or Pellethane®†|
|Pump Head Rollers||Polyethylene|
|Roller Bushings||Oil impregnated bronze|
|Polyethylene, FDA approved|
|Tube & Injection Fittings||PVC or Polypropylene, NSF listed|
|Connecting Nuts||PVC or Polypropylene, NSF listed|
|3/8" Adapter||PVC or Polypropylene, NSF listed|
|Suction Line Strainer and Cap||PVC or Polypropylene, NSF listed, with Ceramic Weight|
|All Fasteners||Stainless steel|
|Pump Head Latches||Polypropylene|
Listings vary by model.
* Santoprene® is a registered trademark of Exxon Mobil Corporation.
** Versilon® is a registered trademark of Saint-Gobain Performance Plastics.
† Pellethane® is a registered trademark of Lubrizol Advanced Materials, Inc.