Home  Products  Parts  Pump Tubes 
Back

Pump Tubes

Stenner Pump Tubes

The pump tube is the workhorse of the pump and requires scheduled replacement according to the needs of each individual application.

On each of the pump tubes, a number or letter is molded into the pump tube fitting to represent the size. Confirm the solution compatibility with the tube material using the Chemical Resistance Guide, before selection.

Refer to the chart below to match the pump tubes with the pump series.

QuickPro® Pump Line
Includes ferrules 1/4" (EUROPE 6 mm)

Part Number UM Description Works With
UCCP201
MCCP201
2-PK
5-PK
#1 Santoprene®* tubeClassic / SVP / S
UCCP202
MCCP202   
2-PK
5-PK
#2 Santoprene®*  tube Classic / SVP / S
UCCP203
MCCP203
2-PK 
5-PK  
#3 Santoprene®*  tubeClassic / SVP / S
UCCP204
MCCP204
2-PK
5-PK
#4 Santoprene®*  tubeClassic / SVP / S
UCCP205
MCCP205
2-PK
5-PK
#5 Santoprene®*  tubeClassic / SVP / S / M128 M05 model
UCCP207
MCCP207
2-PK
5-PK
#7 Santoprene®* tubeClassic 45 & 85 models / SVP / S
M128 M07 model
UCTYG0
MCTYG0
2-PK
5-PK
Versilon®* tube
select # 1, 2, 3, 4 or 5 for

Classic / SVP / S

 EUROPE
UCCP2CE
MCCP2CE
2-PK
5-PK
Santoprene®*  tube
select # 1, 2, 3, 4 or 5 for
Classic /  SVP / S
UCCP27CE
MCCP27CE
2-PK
5-PK
Santoprene®* #7  tubeClassic 45 & 85 / SVP/ S
UCTYCE
MCTYCE
2-PK
5-PK
Versilon®* tube
select # 1, 2, 3, 4 or 5 for
Classic / SVP / S


Includes duckbills, ferrules 1/4" (EUROPE 6 mm)

Part Number UM Description Works With
 
UCCPFD 2-PK Santoprene®*  tube
select # 1or 2 for
Classic /  SVP / S
UCCP7FD2-PKSantoprene®* #7 tubeClassic 45 & 85 / SVP / S
M128 M07
UCTYFD 2-PK Versilon®* tube
select # 1 or 2 for
Classic / SVP / S
EUROPE
UCFDCE 2-PK Santoprene®* tube
select # 1 or 2 for
Classic /  SVP / S
UC7FDCE2-PKSantoprene®* #7 tubeClassic 45 & 85 / SVP / S
UCTYDCE 2-PK Versilon®* tube
select # 1 or 2 for
Classic / SVP / S

*Confirm chemical compatibility with the chemical resistance guide in the catalog or on the website.  Santoprene® is beige and Versilon®* is clear.


Econ Pump Line
Includes ferrules 1/4"

Part Number UM Description Works With
EC30A-2 2-PK Santoprene®* Tube A Econ: F, FX, T, V, VX
EC30B-2 2-PK Santoprene®* Tube B Econ: F, FX, T, V, VX
EC30C-2 2-PK Santoprene®*Tube C Econ: F, VX, T, V, VX
EC3C3-22-PKFKM Tube C3Econ TD electric or battery powered
EC3C4-22-PKSilicone Tube C4Econ TD battery powered
EC30F-2 2-PK Santoprene®* Tube F, Ferrules 1/4" Econ: FP,  Integrator™, LD, T
EC30G-2 2-PK Santoprene®* Tube G, Ferrules 1/4" Econ: FP, Integrator™, T
EC30H-2
2-PK Santoprene®* Tube H, Ferrules 1/4" Econ: FP, FX, Integrator™, Stennicator, T, VX
EC30M-2
2-PK Santoprene®* Tube M, Ferrules 1/4" Econ LD
Home  Products  Parts  Pump Tubes 
Back

  • Refer to pump series flow rate output chart to find the correct tube for your model.
  • The Econ pump tubes must be utilized with the correct roller assembly.

Need Answers?
Product Information, Technical Support or Where to Purchase
Click Here.


Stenner's Recommendation

The first time the pump tube is replaced is a fair indication of the approximate life of the tube in that particular application.

Be sure to verify, that the tube replacement was due to wear and not an outside contributing factor that could shorten the tube’s life.

Did you check for?

  • Chemical attack
  • Mineral deposits at the injection point
  • Sediment blockage at the check valve
  • Seized rollers
  • Exposure to extended heat or sun
  • Excessive back pressure

Each pump manual includes a troubleshooting guide.