Skip to main content
Home Pumps Classic Series Double Head Fixed

Classic Series Double Head Fixed

Reliable electromechanical peristaltic metering pumps

Highlights

  • Interchangeable components
  • Tube replacement without tools

The Double Head Fixed pump is often utilized on large commercial swimming pools.

If requiring more output than the Classic single head pump offers, especially with 25 psi installations for larger commercial swimming pools, then the double head pump may be your answer. Similar to the other models in the Classic series, the pump will dose solutions such as sodium hypochlorite, acid, polyphosphates, biocides for common water treatment applications that include disinfection, pH control, corrosion and scale control, oxidation and sanitization.

The pumps are identified by item number prefix 100F or 170F.

Also utilized in water and wastewater treatment plants, the pump can inject two compatible liquids at the same ratio. The Classic Series double head fixed is built the same way as the single head fixed with the addition of another pump head that doubles the output. The pump runs at  a 100% fixed flow rate output and can be installed to an ORP type controller to manage the output.

Features

  • Interchangeable pump heads and tubes to convert one model to another without having to purchase a new pump.
  • Tube replacement without tools with the patented QuickPro® pump head.
  • The pump is built with three detachable components; the motor and two pump head that can be separated without tools.

How the Double Head Fixed Pump Works

The fixed rate pump does not have an output adjustment. The output is determined by three factors; the rpm of the motor gears and the pump tubes in both heads. The motor’s output shaft rotates at a fixed rpm which drives the roller assembly within the pump head.

 

Flow Rate Outputs

 25 psi (1.7 bar) maximum
Pump
Prefix
Model No. Pump Tube Gallons
per Day
Gallons
per Hour
Ounces
per Minute
Liters
per Day
Liters
per Hour
Milliliters
per Minute
Liters
per Day
Liters
per Hour
Milliliters
per Minute
100 Series
Approximate Output @ 60Hz
Approximate Output @ 50Hz
100FL1 100DMP1 1 6.0 0.25 0.53 22.7 0.95 15.76 18.2 0.76 12.64
100FL2 100DMP2 2 20.0 0.83 1.78 75.7 3.15 52.57 60.6 2.53 42.06
100FL3 100DMP3 3 44.0 1.83 3.91 166.5 6.94 115.63 133.2 5.55 92.50
100FL4 100DMP4 4 70.0 2.92 6.22 265.0 11.04 184.03 212.0 8.83 147.22
100FL5 100DMP5 5 100.0 4.17 8.88 378.5 15.77 262.88 302.8 12.61 210.28
170 Series
Approximate Output @ 60Hz
Approximate Output @ 50Hz
170FL1 170DMP1 1 10.0 0.42 0.89 37.9 1.58 26.32 30.3 1.26 21.04
170FL2 170DMP2 2 34.0 1.42 3.02 128.7 5.36 89.38 102.6 4.29 71.55
170FL3 170DMP3 3 80.0 3.33 7.11 302.8 12.62 210.28 242.2 10.09 168.22
170FL4 170DMP4 4 120.0 5.0 10.66 454.2 18.93 315.42 363.4 15.14 252.36
170FL5 170DMP5 5 170.0 7.08 15.10 643.6 26.80 446.88 514.8 21.45 357.50
100 psi (6.9 bar) maximum
Pump
Prefix
Model No. Pump Tube Gallons
per Day
Gallons
per Hour
Ounces
per Minute
Liters
per Day
Liters
per Hour
Milliliters
per Minute
Liters
per Day
Liters
per Hour
Milliliters
per Minute
100 Series
Approximate Output @ 60Hz
Approximate Output @ 50Hz
100FH1 100DMPHP5 1 6.0 0.25 0.53 22.7 0.95 15.76 18.2 0.76 12.64
100FH2 100DMPHP20 2 20.0 0.83 1.78 75.7 3.15 52.57 60.6 2.53 42.06
170 Series
Approximate Output @ 60Hz
Approximate Output @ 50Hz
170FH1 170DMPHP9 1 10.0 0.42 0.89 37.9 1.58 26.32 30.3 1.26 21.04
170FH2 170DMPHP34 2 34.0 1.42 3.02 128.7 5.36 89.38 102.6 4.29 71.55
Notice
NOTICE: The information within the charts above is solely intended for use as a guide. The output data is an approximation based on pumping water under a controlled testing environment. Many variables can affect the output of the pump. Stenner Pump Company recommends that all metering pumps undergo field calibration by means of analytical testing to confirm their outputs

Technical Data

Specifications
Reproducibility +/- 2%
Maximum Working Pressure 25 psi (1.7 bar), 100 psi (6.9 bar)
Maximum Operating Temperature 125°F (52°C)
Maximum Suction Lift 25 ft (7.6 m) vertical lift, based on water
Motor Type 1/30 HP, shaded pole, class B
Shaft RPM (average maximum) 26 or 44
Duty Cycle Continuous
Maximum Viscosity 1500 Centipoise
Motor Voltage (Amp Draw) 120V 60Hz 1PH (1.7), 220V 60Hz 1PH (0.9)
230V 50Hz 1PH (0.9), 250V 50Hz 1PH (0.9)
Power Cord Type 120V 60Hz, 220V 60Hz: SJTOW
230V 50Hz, 250V 50Hz: H05VV-7
Power Cord Plug End 120V 60Hz NEMA 5-15P, 220V 60Hz NEMA 6-15P
230V 50Hz CEE 7/7, 250V 50Hz CEE 7/7
Cord Length 6 ft (1.8 m)
Classification Indoor and suitable for Outdoor when installed with
a Stenner Rain Roof part number MP90000
Materials of Construction
All Housings Polycarbonate
Pump Tube Santoprene®* (FDA approved) or Versilon®**
Check Valve Duckbill Santoprene®* (FDA approved) or Pellethane®
Pump Head Rollers Polyethylene
Roller Bushings Oil impregnated bronze
Suction/Discharge Tubing
and Ferrules
Polyethylene (FDA approved)
Tube & Injection Fittings PVC or Polypropylene (both NSF listed)
Connecting Nuts PVC or Polypropylene (both NSF listed)
3/8″ Adapter PVC or Polypropylene (both NSF listed)
Suction Line Strainer and Cap PVC or Polypropylene (both NSF listed); ceramic weight
All Fasteners Stainless steel
Pump Head Latches Polypropylene

*   Santoprene® is a registered trademark of Celanese International Corporation.
** Versilon®    is a registered trademark of Saint-Gobain Performance Plastics.
†  Pellethane® is a registered trademark of Lubrizol Advanced Materials, Inc.

 

Agency Listings

Listings vary by model.

 

Pump Dimensions

Double Head Fixed Peristaltic Injection Pump Dimensions

Shipping Weight

10 lbs (4.1 kg)

Box Dimensions

18 x 8 x 10 in. (46 x 21 x 25 cm)

Dimensions & weight

Related Products