Electromechanical | Classic Series | Single Head Fixed Output Injection Pump
For over 60 years, Stenner's single head fixed output injection pump has been a reliable peristaltic pump.
- Self-priming against maximum working pressure, foot valve not required.
- Can run dry and does not clog from dirt and debris.
- Can pump off-gassing solutions without losing prime.
Flow Rate Outputs
3.0 to 85.0 gpd up to 25 psi maximum
3.0 to 40.0 gpd up to 100 psi maximum
The electromechanical Classic Single Head Fixed Output Injection Pump works well with controllers.
The Single Head Fixed Output Injection Pump is one of four types in Stenner's Classic Series. This peristaltic metering pump injects solutions at a fixed rate and can be activated by a water meter for proportional feed for drinking water disinfection for animal health or homeowners. It can also be installed with a controller for sanitizing a swimming pool. Great news for installers in the commercial pool industry, the Classic Series single head fixed pump has been tested by ETL to conform to the ANSI/NSF standard 50 when used with ANSI/NSF 50 listed controllers. Additional applications include pH control, oxidation, corrosion and scale control and more.
The pump is also a component of Stenner’s pre-assembled panel system known as the Proportional Injection System. The Proportional Injection System doses solution that is proportional to a water system’s flow rate based on the water volume. A water meter sends a signal to Stenner’s PCM (Pump Control Module) which actuates the fixed output pump. The system is suited for constant pressure (variable speed) well pumps, poultry and livestock houses, irrigation and systems with demand based backup wells and any application with varying flow rates. If a pre-assembled system isn’t your preference, the pump, PCM and water meter are also available separately. Refer to the chemical resistance guide to determine the compatibility of the wetted components with the solution you want to pump or Contact Us.
Unique Stenner Features
- Interchangeable pump heads and tubes to convert one model to another; not necessary to purchase a new pump.
- Easy and fast tube replacement without tools with the QuickPro® pump head.
- The pump is built with two detachable components; the motor and the pump head that can be separated without tools.
How the Single Head Fixed Output Injection Pump Works
The output is not adjustable and is determined by the rpm of the motor gears and the size of the pump tube. The motor’s output shaft rotates at a fixed rpm which drives the roller assembly within the pump head.
The 45 and 85 models are two sub-series within the Classic Series Single Head Pumps (Adjustable and Fixed) and below is a summary of the primary differences in the Fixed models.
|45 Series Fixed Output||85 Series Fixed Output|
Click on output to find the specific output range and pressure rating for each model.
California Residents: Proposition 65 Warning
|To view these documents, you need Adobe Acrobat Reader. You can download a free copy from the Adobe website.|
Flow Rate Output Chart 25 psi (1.7 bar) maximum
Flow Rate Output 100 psi (6.9 bar) maximum
NOTE: Injection check valve included with pumps rated 100 psi (6.9 bar) maximum.
|NOTICE: The information within this chart is solely intended for use as a guide. The output data is an approximation based on pumping water under a controlled testing environment. Many variables can affect the output of the pump. Stenner Pump Company recommends that all metering pumps undergo field calibration by means of analytical testing to confirm their outputs.|
|Flow Rate Output Control||No adjustment|
|Reproducibility||+ / – 2%|
|Maximum Working Pressure||25 psi (1.7 bar), 100 psi (6.9 bar)|
|Maximum Operating Temperature||125°F (52°C)|
|Maximum Suction Lift||25 ft (7.6 m) vertical lift, based on water|
|Motor Type||1/30 HP, shaded pole, class B|
|Shaft RPM (average maximum)||26 or 44|
|Maximum Viscosity||1500 Centipoise|
|Motor Voltage (Amp Draw)||120V 60Hz 1PH (1.7)|
220V 60Hz 1PH (0.9)
230V 50Hz 1PH (0.9)
250V 50Hz 1PH (0.9)
|Power Cord Type||120V 60Hz, 220V 60Hz: SJTOW|
230V 50Hz, 250V 50Hz: H05VV-F
|Power Cord Plug End||120V 60Hz NEMA 5-15P|
220V 60Hz NEMA 6-15P
230V 50Hz CEE7/7
250V 50Hz CEE 7/7
|Cord Length||6 ft (1.8 m)|
|Classification||Indoor and suitable for Outdoor when installed with|
a Stenner Rain Roof part number MP90000
|Materials of Construction|
|Pump Tube||Santoprene®* or Versilon®**, FDA approved|
|Check Valve Duckbill (when applicable)||Santoprene®* or Pellethane®†, FDA approved|
|Pump Head Rollers||HDPE|
|Roller Bushings||Oil impregnated bronze|
|Polyethylene, FDA approved|
|Tube and Injection Fittings||PVC or Polypropylene, NSF listed|
|Connecting Nuts||PVC or Polypropylene, NSF listed|
|3/8" Adapter||PVC or Polypropylene, NSF listed|
|Suction Line Strainer and Cap||PVC or Polypropylene, NSF listed with Ceramic Weight|
|All Fasteners||Stainless steel|
|Pump Head Latches||Polypropylene|
Listings vary by model.
* Santoprene® is a registered trademark of Exxon Mobil Corporation.
** Versilon® is a registered trademark of Saint-Gobain Performance Plastics.
† Pellethane® is a registered trademark of Lubrizol Advanced Materials, Inc.
Shipping Weight: 8 lbs (3.4 kg)
Box Dimensions: 13 x 8 x 10 in. (33 x 20 x 24 cm)
|Pump Tubes||Motor Complete|
|Motor Service Kits|
Pump Head Service Kit
Pump Head Parts
|Gear Case Service Kit|
|Check Valves||Other Accessories|